Overview
Blind nuts have a closed barrel that protects the screw thread and seals the panel against water, dust and paint. They also stop a long screw damaging parts behind the panel.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-B, KB-BS |
|---|---|
| Zinc Plated Steel | KB-B |
| Stainless Steel | KB-BS |
| Sizes | M3, M4, M5, M6 |
| Sheet hardness (KB-B) | HRB 80 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M3 | M4 | M5 | M6 | ||||
|---|---|---|---|---|---|---|---|---|
| Shank code | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 |
| A max. | 0.97 | 1.38 | 0.97 | 1.38 | 0.97 | 1.38 | 1.38 | 2.21 |
| Min. sheet thickness | 1.0 | 1.4 | 1.0 | 1.4 | 1.0 | 1.4 | 1.4 | 2.29 |
| Recommended hole size +0.08 | 4.22 | 5.41 | 6.35 | 8.75 | ||||
| B max. | 4.20 | 5.38 | 6.33 | 8.73 | ||||
| C max. | 3.84 | 5.2 | 6.02 | 7.8 | ||||
| D ±0.25 | 6.35 | 7.95 | 8.75 | 11.1 | ||||
| E min. | 5.3 | 7.1 | 7.1 | 7.8 | ||||
| H ±0.25 | 9.6 | 11.2 | 11.2 | 14.3 | ||||
| L max. | 8.5 | 9.8 | 9.8 | 12.7 | ||||
| Min. distance to edge of sheet | 4.8 | 6.9 | 7.1 | 8.6 | ||||
Performance data: KB-B / KB-BS (test sheet: steel)
| Thread | M3 | M4 | M5 | M6 | ||||
|---|---|---|---|---|---|---|---|---|
| Shank code | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 |
| Sheet thickness (mm) | 1.0 | 1.4 | 1.0 | 1.4 | 1.0 | 1.4 | 1.4 | 2.3 |
| Installation (kN) | 11.5 | 14.0 | 16.0 | 21.0 | 18.0 | 25.0 | 26.0 | 26.0 |
| Pushout (N) | 572 | 1021 | 604 | 1256 | 631 | 1419 | 1782 | 1782 |
| Torque-out (Nm) | 1.7 | 2.15 | 3.5 | 5.1 | 4.1 | 6.9 | 11.9 | 12.0 |
Key features
- Sealed, closed end
- Steel and stainless
- Protects the screw
Applications
Outdoor enclosuresAppliancesElectrical panelsAutomotive
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
