Overview
Blind standoffs are closed at one end, so the screw cannot pass through and the panel stays sealed. They press into thin sheet and hold boards or parts at a fixed height.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-BSO, KB-BSOS, KB-BSO4, KB-BSOA |
|---|---|
| Zinc Plated Steel | KB-BSO |
| Stainless Steel | KB-BSOS |
| 400 Series Stainless Steel | KB-BSO4 |
| Aluminium | KB-BSOA |
| Sizes | M2, M2.5, M3, M3.5, M4, M5 |
| Sheet hardness (KB-BSOA) | HRB 50 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M2, M2.5, M3 | M3 alt | M4 | M5 |
|---|---|---|---|---|
| C -0.13 | 4.2 | 5.39 | 7.12 | 7.12 |
| A nom. | 4.8 | 6.4 | 7.9 | 7.9 |
| Min. sheet thickness | 1.0 | 1.0 | 1.27 | 1.27 |
| Recommended hole size +0.08 | 4.22 | 5.41 | 7.14 | 7.14 |
| Min. distance to edge of sheet | 6.0 | 6.8 | 8.0 | 8.0 |
Lengths L (+0.05/-0.13) and minimum thread depth B (mm)
| Length L | 5 | 6 | 7 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 22 | 25 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread depth B min. | 2.8 | 3.2 | 3.6 | 4.0 | 5.0 | 6.5 | 9.5 | ||||||
Performance data: KB-BSO / KB-BSOS (test sheet: steel, 1.5 mm)
| Thread | M2, M2.5, M3 | M3 alt | M3.5, M4 | M5 |
|---|---|---|---|---|
| Installation (kN), steel and stainless | 9.9 | 14.8 | 17.9 | 17.9 |
| Torsional resistance (Nm), steel and stainless | 2.16 | 3.95 | 8.5 | 8.5 |
| Pushout (N), steel and stainless | 1050 | 1870 | 2500 | 2500 |
| Pull-through (N) – steel | 1470 | 1470 | 3180 | 3180 |
| Pull-through (N) – stainless | 1180 | 1180 | 2490 | 2490 |
| Max. torque for mating screw (Nm) – steel | 0.56 | 0.56 | 2.1 | 3.7 |
| Max. torque for mating screw (Nm) – stainless | 0.45 | 0.45 | 1.7 | 2.9 |
Key features
- Sealed blind end
- Steel, stainless, 400-series and aluminium
- Accurate spacing
Applications
PCB mountingSealed enclosuresElectronicsInstrumentation
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
