Overview
Clear hole standoffs have a plain bore instead of a thread. A screw passes through them to a nut or tapped part beyond, while the standoff sets the spacing.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-SO |
|---|---|
| Zinc Plated Steel | KB-SO |
| Sheet hardness (KB-SO) | HRB 80 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Diameter code | 43.1 | 63.1 | 63.6 | 83.6 | 84.1 | 85.1 |
|---|---|---|---|---|---|---|
| D counterbore diameter ±0.13 | 3.1 | 3.1 | 3.6 | 3.6 | 4.1 | 5.1 |
| C ±0.13 | 4.2 | 5.39 | 5.39 | 7.12 | 7.12 | 7.12 |
| A nom. | 4.8 | 6.4 | 6.4 | 7.9 | 7.9 | 7.9 |
| Min. sheet thickness | 1.0 | 1.0 | 1.0 | 1.27 | 1.27 | 1.27 |
| Recommended hole size +0.08 | 4.22 | 5.41 | 5.41 | 7.14 | 7.14 | 7.14 |
| Min. distance to edge of sheet | 6.0 | 6.8 | 6.8 | 8.0 | 8.0 | 8.0 |
Lengths L +0.05/-0.13 (mm)
| Length L | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
|---|
Key features
- Plain clearance bore
- Accurate spacing
- Zinc plated steel
Applications
Stacked boardsSpacers for long screwsElectronicsPanels
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
