Customer login[email protected]Mon–Sat · 10 am – 6 pm IST
  1. Home
  2. Products
  3. Clip-On Standoffs
K&B Self-Clinching & Weld Fasteners

Clip-On Standoffs

Snap-top standoffs: push the board on, no screw needed.

Clip-On Standoffs
Overview

Clip-on (snap-top) standoffs hold a PCB with a spring clip at the top. Boards push on and pull off without screws, saving assembly time.

Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.

Specifications

Part numbersKB-SSS, KB-SSC, KB-SSA
Zinc Plated SteelKB-SSS
Stainless SteelKB-SSC
AluminiumKB-SSA
Sheet hardness (KB-SSS)HRB 60 or less

Dimensions & performance data

All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.

Dimensions (mm)

Top panel mounting hole diameterLength code L ±0.13A max.B ±0.13C ±0.13D ±0.13Hole size +0.08
Metric 4 mm8, 10, 12, 14, 16, 18, 20, 22, 255.394.783.586.355.4

Performance data: KB-SSS / KB-SSC / KB-SSA

TypeSteel, zincStainless steelAluminium
Installation (kN)15.616.56.7
Pushout (kN)17851785881
Test sheet materialSteelSteelAluminium
Test sheet thickness (mm)1.51.51.0

Mounting: panel 1 (metal, HRB 50) and panel 2 (PC board or metal)

Part no.KB-SSSKB-SSCKB-SSA
Panel 1: bottom mounting hole +0.085.41
Panel 1: max. hardnessHRB 60HRB 70HRB 50
Panel 1: min. thickness1.0
Panel 1: min. distance to edge of sheet6.6
Panel 1: max. location tolerance±0.13
Panel 2: top mounting hole +0.084.0
Panel 2: max. hardnessNo limit
Panel 2: thickness range1-1.8
Panel 2: min. distance to edge of sheet2.54

Download the full K&B catalogue (PDF) →

Key features

  • Tool-free board fitting
  • Steel, stainless and aluminium
  • Fast assembly

Applications

PCB mountingElectronicsTelecomConsumer devices

Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →

Need a size, grade or finish?