Customer login[email protected]Mon–Sat · 10 am – 6 pm IST
  1. Home
  2. Products
  3. Concealed Head Studs
K&B Self-Clinching & Weld Fasteners

Concealed Head Studs

Studs fitted into a blind hole so the reverse side stays untouched.

Concealed Head Studs
Overview

Concealed head studs install into a blind (not through) hole, so the opposite face of the panel stays smooth, unmarked and ready for finishing.

Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.

Specifications

Part numbersKB-CHC, KB-CFHC, KB-CHA, KB-CFHA
Stainless SteelKB-CHC, KB-CFHC
AluminiumKB-CHA, KB-CFHA
SizesM3, M4, M5
Sheet hardness (KB-CHC/CFHC)HRB 70 or less

Dimensions & performance data

All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.

Dimensions (mm)

ThreadM3M4M5
D ±0.45.218.338.89
C max.4.357.357.9
Blind mounting hole ±0.084.377.377.93
Min. distance to edge of sheet4.05.66.4
Hole in mating part +0.083.64.65.6
Hole depth – KB-CHC / KB-CHA1.10
Hole depth – KB-CFHC / KB-CFHA1.91
A max. – KB-CHC / KB-CHA1.04
A max. – KB-CFHC / KB-CFHA1.80
Min. sheet thickness – KB-CHC / KB-CHA1.60
Min. sheet thickness – KB-CFHC / KB-CFHA2.40

Preferred lengths L ±0.4 (mm)

Length LM3M4M5
6••
8••
10••
12•••
16•••
20••
25•

Performance data: KB-CHC / KB-CFHC / KB-CHA / KB-CFHA

ThreadM3M4M5
Installation (kN) – stainless steel KB-CHC8.017.822.2
Installation (kN) – stainless steel KB-CFHC8.914.717.8
Installation (kN) – aluminium KB-CHA6.212.517.8
Installation (kN) – aluminium KB-CFHA6.713.315.6
Pushout (N) – stainless steel KB-CHC106512001290
Pushout (N) – stainless steel KB-CFHC106519553020
Pushout (N) – aluminium KB-CHA555645755
Pushout (N) – aluminium KB-CFHA84510651330
Max. tightening torque (Nm) – stainless steel KB-CHC0.52.03.6
Max. tightening torque (Nm) – stainless steel KB-CFHC0.52.03.6
Max. tightening torque (Nm) – aluminium KB-CHA0.31.22.16
Max. tightening torque (Nm) – aluminium KB-CFHA0.31.22.16

Download the full K&B catalogue (PDF) →

Key features

  • Reverse side stays clean
  • Stainless and aluminium
  • No through hole needed

Applications

Front panelsDisplay casesCosmetic surfacesInstrument fascias

Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →

Need a size, grade or finish?