Overview
Floating fasteners hold a nut in a clinch retainer that lets it move slightly, so mating holes do not need to line up exactly. Locking versions also resist vibration.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-LAS, KB-AS, KB-LAC, KB-AC |
|---|---|
| Zinc Plated Steel | KB-LAS, KB-AS |
| Stainless Steel | KB-LAC, KB-AC |
| Sizes | M3, M4, M5, M6 |
| Sheet hardness (KB-LAS/AS) | HRB 70 or less |
| Sheet hardness (KB-LAC/AC) | HRB 70 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M3 | M4 | M5 | M6 | |||
|---|---|---|---|---|---|---|---|
| Shank code | 1 | 2 | 1 | 2 | 1 | 2 | 2 |
| A max. | 0.97 | 1.38 | 0.97 | 1.38 | 0.97 | 1.38 | 1.38 |
| Min. sheet thickness | 0.97 | 1.38 | 0.97 | 1.38 | 0.97 | 1.38 | 1.38 |
| Recommended hole size +0.08 | 7.37 | 9.35 | 10.31 | 13.08 | |||
| B max. | 7.35 | 9.33 | 10.29 | 13.06 | |||
| C max. | 7.37 | 9.28 | 10.29 | 12.96 | |||
| D ±0.4 | 9.14 | 11.18 | 11.94 | 15.24 | |||
| h max. | 4.83 | 5.34 | 6.86 | 7.88 | |||
| J max. | 3.31 | 3.31 | 4.32 | 5.34 | |||
| Min. distance to edge of sheet | 7.62 | 8.64 | 9.14 | 10.67 | |||
Performance data: KB-LAS / KB-LAC (test sheet: steel)
| Thread | M3 | M4 | M5 | M6 | |||
|---|---|---|---|---|---|---|---|
| Shank code | 1 | 2 | 1 | 2 | 1 | 2 | 2 |
| Sheet thickness (mm) | 1.0 | 1.6 | 1.0 | 1.6 | 1.0 | 1.6 | 1.6 |
| Installation (kN) | 13.3 | 13.3 | 13.3 | 13.3 | 15.6 | 15.6 | 22.2 |
| Pushout (N) | 1341 | 1340 | 1338 | 1784 | 1789 | 2009 | 2226 |
| Torque-out (Nm) | 9.7 | 17.0 | 17.1 | 22.8 | 16.9 | 22.9 | 36.9 |
Key features
- Compensates misalignment
- Locking or non-locking
- Steel and stainless
Applications
Large panel assembliesRacksVehicle bodiesCovers
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
