Overview
Flush head studs are pressed into a drilled or punched hole until the head sits flush with the sheet. The serrated head locks against rotation and the sheet flows into the undercut, giving a permanent, high-strength threaded stud in sheet as thin as 1 mm.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-FH, KB-FHS, KB-FH4, KB-FHA |
|---|---|
| Zinc Plated Steel | KB-FH |
| Stainless Steel | KB-FHS |
| 400 Series Stainless Steel | KB-FH4 |
| Aluminium | KB-FHA |
| Sizes | M2, M2.5, M3, M3.5, M4, M5, M6, M8 |
| Sheet hardness (KB-FH) | HRB 80 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M2 | M2.5 | M3 | M3.5 | M4 | M5 | M6 | M8 |
|---|---|---|---|---|---|---|---|---|
| D ±0.4 | 3.5 | 4.1 | 4.6 | 5.3 | 5.9 | 6.5 | 8.2 | 9.6 |
| H max. | 1.95 | 1.95 | 2.1 | 2.2 | 2.4 | 2.7 | 3.0 | 3.7 |
| Min. sheet thickness | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.6 | 2.4 |
| Recommended hole size +0.08 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 5.0 | 6.0 | 8.0 |
| Min. distance to edge of sheet | 5.2 | 5.4 | 5.6 | 6.4 | 7.2 | 7.2 | 7.9 | 9.6 |
Preferred lengths L ±0.4 (mm)
| Length L | M2 | M2.5 | M3 | M3.5 | M4 | M5 | M6 | M8 |
|---|---|---|---|---|---|---|---|---|
| 5 | • | • | ||||||
| 6 | • | • | • | • | • | |||
| 8 | • | • | • | • | • | • | • | • |
| 10 | • | • | • | • | • | • | • | • |
| 12 | • | • | • | • | • | • | • | • |
| 15 | • | • | • | • | • | • | • | • |
| 16 | • | • | • | • | • | • | • | |
| 18 | • | • | • | • | • | • | • | |
| 20 | • | • | • | • | • | • | • | • |
| 22 | • | • | • | • | • | |||
| 25 | • | • | • | • | • | • | ||
| 28 | • | • | • | • | ||||
| 30 | • | • | • | • | • | |||
| 35 | • | • | • | • | • | |||
| 38 | • | • | • | • | ||||
| 40 | • | • | • | • | ||||
| 45 | • | • | • | • | ||||
| 50 | • | • | • | • |
Performance data: KB-FH4 (test sheet: stainless steel, 400 series)
| Thread | M2.5 | M3 | M4 | M5 | M6 | M8 |
|---|---|---|---|---|---|---|
| Sheet thickness (mm) | 1.4 | 1.5 | 1.5 | 1.5 | 1.5 | 2.5 |
| Installation (kN) | 40.0 | 41.0 | 51.0 | 54.0 | 71.0 | 73.5 |
| Pushout (N) | 2000 | 2230 | 3300 | 3600 | 4210 | 5500 |
| Torque-out (Nm) | 14 | 1.8 | 6.6 | 10.8 | 15.9 | 30.0 |
| Pull through (N) | - | 3300 | 8010 | 10020 | 14950 | - |
Performance data: KB-FHS (test sheet: stainless steel)
| Thread | M2 | M2.5 | M3 | M4 | M5 | M6 | M8 |
|---|---|---|---|---|---|---|---|
| Sheet thickness (mm) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 2.5 | 2.5 |
| Installation (kN) | 13.5 | 13.5 | 14.7 | 26.0 | 32.0 | 44.0 | 49.9 |
| Torsional resistance (Nm) | 0.45 | 0.8 | 1.4 | 2.9 | 6.4 | 10.0 | 17.0 |
| Pushout (N) | 740 | 740 | 820 | 1790 | 2000 | 2500 | 2800 |
| Pull through (N) | - | 1800 | 2450 | 4800 | 6000 | 10600 | 13600 |
Performance data: KB-FH (test sheet: steel)
| Thread | M2 | M2.5 | M3 | M3.5 | M4 | M5 | M6 | M8 |
|---|---|---|---|---|---|---|---|---|
| Sheet thickness (mm) | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 2.5 | 2.5 |
| Installation (kN) | 9.0 | 11.0 | 14.7 | 22.3 | 28.0 | 33.5 | 45.0 | 45.0 |
| Torsional resistance (Nm) | 0.45 | 1.0 | 1.7 | 2.8 | 4.3 | 6.8 | 12.0 | 19.5 |
| Pushout (N) | 700 | 740 | 820 | 1335 | 1800 | 2100 | 2600 | 2900 |
| Pull through (N) | 1700 | 2800 | 3900 | 3780 | 5700 | 6300 | 11400 | 15500 |
Key features
- Head flush with the sheet
- Steel, stainless, 400-series stainless and aluminium
- High torque-out and push-out
Applications
Electrical enclosuresChassis and framesEarthing pointsAppliances
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
Low Displacement Flush Head StudsFlush studs that disturb the sheet very little, close to edges.View details →
