Overview
Grounding standoffs make a dependable electrical connection between a PCB and the metal chassis, while also holding the board at a set height.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-SOSG |
|---|---|
| Stainless Steel | KB-SOSG |
| Sizes | M3 |
| Sheet hardness (KB-SOSG) | HRB 70 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M3 |
|---|---|
| C ±0.13 | 5.39 |
| D nom. | 6.4 |
| Min. sheet thickness | 1.0 |
| Knurling | 0.76 |
| Recommended hole size +0.08 | 5.4 |
| Min. distance to edge of sheet | 6.8 |
Lengths L ±0.13 (mm)
| Thread | Type | Length code L |
|---|---|---|
| M3 | KB-SOSG | 3, 4, 6, 8, 10, 12 |
Key features
- Reliable earth contact
- Stainless steel
- Board spacing
Applications
PCB groundingEMC-sensitive electronicsTelecomControl panels
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
