Overview
Low displacement studs need less installation force and displace less material, so they can be placed closer to the edge of the sheet and to bends without distorting the part.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-FHL, KB-FHLS |
|---|---|
| Zinc Plated Steel | KB-FHL |
| Stainless Steel | KB-FHLS |
| Sizes | M2.5, M3, M4, M5 |
| Sheet hardness (KB-FHL) | HRB 80 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M2.5 | M3 | M4 | M5 |
|---|---|---|---|---|
| D ±0.4 | 3.15 | 3.65 | 4.65 | 5.9 |
| H max. | 2.1 | 2.1 | 2.4 | 2.7 |
| Min. sheet thickness | 1.0 | |||
| Recommended hole size +0.08 | 2.5 | 3.0 | 4.0 | 5.0 |
| Min. distance to edge of sheet | 2.8 | 3.3 | 4.3 | 5.6 |
Preferred lengths L ±0.4 (mm)
| Length L | M2.5 | M3 | M4 | M5 |
|---|---|---|---|---|
| 6 | • | • | • | • |
| 8 | • | • | • | • |
| 10 | • | • | • | • |
| 12 | • | • | • | • |
| 15 | • | • | • | • |
| 18 | • | • | • | • |
| 20 | • | • | • | |
| 25 | • | • | ||
| 30 | • |
Performance data: KB-FHL / KB-FHLS
| Thread | M2.5 | M3 | M4 | M5 |
|---|---|---|---|---|
| Test sheet thickness (mm) – aluminium | 1.2 | 1.2 | 1.2 | 1.2 |
| Test sheet thickness (mm) – steel | 1.1 | 1.1 | 1.1 | 1.1 |
| Installation (kN) – aluminium | 3.2 | 4.5 | 5.4 | 11.1 |
| Installation (kN) – steel | 5.4 | 5.4 | 6.7 | 20.1 |
| Pushout (N) – aluminium | 286 | 286 | 370 | 535 |
| Pushout (N) – steel | 451 | 476 | 555 | 1010 |
| Torque-out (Nm) – aluminium | 0.56 | 0.66 | 1.2 | 2.2 |
| Torque-out (Nm) – steel | 1.2 | 1.3 | 2.2 | 4.5 |
| Pull through (N) – aluminium | 1250 | 1300 | 1560 | 1900 |
| Pull through (N) – steel | 2290 | 2550 | 3350 | 3760 |
Key features
- Low installation force
- Close to edges
- Steel and stainless
Applications
Small enclosuresElectronicsBrackets near bendsThin panels
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
