Overview
Low profile panel fasteners keep the captive screw head very close to the panel, where space in front of the door is limited.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-PF31, KB-PF32 |
|---|---|
| Nickel Plated Steel | KB-PF31, KB-PF32 |
| Sizes | M3, M4, M5, M6 |
| Sheet hardness (KB-PF31) | HRB 60 or less |
| Sheet hardness (KB-PF32) | HRB 60 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M3 | M4 | M5 | M6 | |||
|---|---|---|---|---|---|---|---|
| Type | KB-PF31 | KB-PF32 | KB-PF31 | KB-PF32 | KB-PF31 | KB-PF32 | KB-PF32 |
| Screw length code | 30 | 30 | 30 | 35 | |||
| A max. | 0.97 | 1.48 | 0.97 | 1.48 | 0.97 | 1.48 | 1.48 |
| Min. sheet thickness | 1.0 | 1.5 | 1.0 | 1.5 | 1.0 | 1.5 | 1.5 |
| Recommended hole size +0.08 | 5.5 | 6.4 | 8.0 | 9.5 | |||
| B max. | 5.48 | 6.38 | 7.98 | 9.48 | |||
| L nom. | 15.11 | 15.24 | 15.37 | 17.15 | |||
| D ±0.13 | 5.13 | 5.26 | 5.59 | 6.12 | |||
| E ±0.25 | 10.31 | 11.89 | 13.46 | 15.88 | |||
| C ±0.4 | 7.62 | 7.62 | 7.62 | 8.89 | |||
| L1 max. | 8.26 | 8.38 | 8.51 | 9.78 | |||
| Min. distance to edge of sheet | 6.6 | 7.37 | 8.38 | 9.65 | |||
Performance data: KB-PF31 / KB-PF32 (test sheet: aluminium*)
| Thread | M3 | M4 | M5 | M6 |
|---|---|---|---|---|
| Installation (kN), KB-PF31 and KB-PF32 | 9.9 | 12.6 | 15.6 | 19.2 |
*Can be used in cold rolled steel provided the hardness does not exceed Rockwell B30.
Key features
- Very low height
- Nickel plated steel
- Captive screw
Applications
Slim enclosuresRack panelsElectronicsMedical devices
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
