Overview
Panel fasteners are captive screw assemblies clinched into the door or cover. The screw stays with the panel when it is opened, so no screws are lost during service.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-PFS2, KB-PFC2 |
|---|---|
| Zinc Plated Steel | KB-PFS2 |
| Stainless Steel | KB-PFC2 |
| Sizes | M3, M4, M5, M6 |
| Sheet hardness (KB-PFS2) | HRB 80 or less |
| Sheet hardness (KB-PFC2) | HRB 70 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M3 | M4 | M5 | M6 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Screw length code | 40 | 62 | 50 | 72 | 94 | 50 | 72 | 94 | 60 | 82 | 04 |
| A max. | 1.53 | 1.53 | 1.53 | 1.53 | |||||||
| B max. | 6.71 | 7.9 | 8.72 | 10.47 | |||||||
| C ±0.4 | 6.4 | 9.5 | 7.9 | 11.1 | 14.3 | 7.9 | 11.1 | 14.3 | 9.5 | 12.7 | 15.9 |
| D ±0.13 | 1.83 | 2.08 | 2.08 | 2.46 | |||||||
| E ±0.25 | 7.92 | 9.53 | 10.31 | 11.89 | |||||||
| L nom. | 13.72 | 17.53 | 17.53 | 22.35 | |||||||
| L1 max. | 9.14 | 11.43 | 11.47 | 14.73 | |||||||
| Min. sheet thickness | 1.53 | 1.53 | 1.53 | 1.53 | |||||||
| Recommended hole size +0.08 | 6.73 | 7.90 | 8.74 | 10.49 | |||||||
| Screw protrusion before installation ±0.64 | 0 | 3.2 | 0 | 3.2 | 6.4 | 0 | 3.2 | 6.4 | 0 | 3.2 | 6.4 |
| Min. distance to edge of sheet | 6.35 | 7.87 | 8.63 | 9.65 | |||||||
Performance data: KB-PFS2 / KB-PFC2
| Thread | M3 | M4 | M5 | M6 |
|---|---|---|---|---|
| Installation (kN) – aluminium | 10.8 | 13.0 | 13.4 | 15.6 |
| Installation (kN) – steel | 13.4 | 17.0 | 17.9 | 22.3 |
| Pushout (N) – aluminium | 1070 | 1335 | 1780 | 1780 |
| Pushout (N) – steel | 1335 | 1780 | 2230 | 2670 |
Key features
- Screw stays captive
- Steel and stainless
- Repeated opening
Applications
Access panelsEnclosure doorsMachinery coversElectronics
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
