Overview
Miniature self-locking nuts with a squeezed (deformed) thread that gives prevailing-torque locking, for small screws in compact electronics.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-UL, KB-FE, KB-FEO |
|---|---|
| Stainless Steel | KB-UL, KB-FE, KB-FEO |
| Sizes | M2, M3, M4, M5, M6 |
| Sheet hardness (KB-UL/FE/FEO) | HRB 70 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions: KB-UL (mm)
| Thread | M2 |
|---|---|
| E | 4.07 |
| A | 0.79 |
| C | 3.60 |
| D | 2.50 |
| T | 1.65 |
| Sheet thickness | 0.76 - 0.91 |
| Recommended hole size +0.08 | 3.61 |
| Min. distance to edge of sheet | 2.80 |
Dimensions: KB-FE / KB-FEO (mm)
| Thread | M3 | M4 | M5 | M6 |
|---|---|---|---|---|
| E | 4.88 | 8.17 | 8.17 | 9.74 |
| A – KB-FE | 1.53 | 1.52 | 1.53 | 1.53 |
| A – KB-FEO | 1.02 | 1.02 | 1.02 | 1.53 |
| C | 4.37 | 7.37 | 7.37 | 8.72 |
| D | 3.96 | 5.23 | 6.48 | 7.72 |
| T | 1.9 | 2.55 | 3.05 | 3.3 |
| Sheet thickness – KB-FE | 1.5 - 1.78 | 1.5 - 1.78 | 1.5 - 1.78 | 1.5 - 1.78 |
| Sheet thickness – KB-FEO | 0.99 - 1.14 | 0.99 - 1.14 | 0.99 - 1.14 | 1.5 - 1.78 |
| Hole size in sheet +0.08 | 4.39 | 7.39 | 7.39 | 8.74 |
| Min. distance to edge of sheet | 3.6 | 5.2 | 5.2 | 7.1 |
For M6 the catalogue gives one value of A (1.53) and of sheet thickness (1.5 - 1.78) for both KB-FE and KB-FEO.
Key features
- Miniature sizes
- Prevailing-torque locking
- Stainless steel
Applications
Compact electronicsInstrumentsTelecomMedical devices
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
