Overview
Hole slide lock standoffs work with a keyhole slot in the board: the board slides over the head and locks in place, allowing quick fitting and removal.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-SKC |
|---|---|
| Stainless Steel | KB-SKC |
| Sheet hardness (KB-SKC) | HRB 70 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Body size - sheet code | 61.5 |
|---|---|
| A max. | 5.39 |
| B ±0.08 | 4.5 |
| C max. | 2.75 |
| D nom. | 6.35 |
| G ±0.08 | 1.73 |
| Recommended hole size +0.08 | 5.5 |
Lengths L ±0.13 (mm)
| Length code L | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 |
|---|
Performance data: KB-SKC (test sheet thickness 1.52 mm)
| Body sheet code | Installation (kN), steel | Pushout (N), steel | Installation (kN), 5052-H34 aluminium | Pushout (N), 5052-H34 aluminium |
|---|---|---|---|---|
| 61.5 | 14.3 | 2650 | 7.0 | 1100 |
Mounting: panel 1 (metal, HRB 50) and panel 2 (PC board or metal)
| Part no. | KB-SKC |
|---|---|
| Panel 1: bottom mounting hole +0.08 | 5.4 |
| Panel 1: max. hardness | HRB 70 |
| Panel 1: min. thickness | 1.0 |
| Panel 1: min. distance to edge of sheet | 6.6 |
| Panel 1: max. location tolerance | ±0.13 |
| Panel 2: top mounting hole A1 nom. | 1.5 |
| Panel 2: top mounting hole A2 ±0.08 | 3.0 |
| Panel 2: top mounting hole A3 ±0.08 | 5.0 |
| Panel 2: top mounting hole A4 min. | 3.75 |
| Panel 2: thickness range | 1.45-1.62 |
| Panel 2: min. distance to edge of sheet | 4.1 |
Key features
- Slide-and-lock mounting
- Stainless steel
- Quick removal
Applications
Removable boardsService panelsElectronicsInstruments
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
