Overview
Thin sheet nuts install in sheet as thin as 0.64 mm, where standard clinch nuts need thicker material.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the tables below, taken from the K&B Self-Clinching Fasteners Catalogue.
Specifications
| Part numbers | KB-SMPS |
|---|---|
| Zinc Plated Steel | KB-SMPS |
| Sizes | M2.5, M3, M3.5 |
| Sheet hardness (KB-SMPS) | HRB 70 or less |
Dimensions & performance data
All dimensions in mm unless stated. Values from the K&B Self-Clinching Fasteners Catalogue. Install into sheet within the hardness limits shown in the specifications.
Dimensions (mm)
| Thread | M2.5 | M3 | M3.5 |
|---|---|---|---|
| A shank max. | 0.61 | ||
| Min. sheet thickness | 0.64 | ||
| Recommended hole size +0.08 | 3.8 | 4.24 | 4.75 |
| C max. | 3.79 | 4.22 | 4.73 |
| E ±0.25 | 5.6 | 5.6 | 6.4 |
| T ±0.25 | 1.4 | ||
| Min. distance to edge of sheet | 3.7 | 4.3 | 5.1 |
Preferred range
| Thread | M2.5 | M3 | M3.5 |
|---|---|---|---|
| Preferred | • | • |
Performance data: KB-SMPS (test sheet: steel)
| Thread | M2.5 | M3 | M3.5 |
|---|---|---|---|
| Installation (kN) | 6.7 | 8.0 | 8.8 |
| Pushout (N) | 156 | 267 | 289 |
| Torque-out (Nm) | 1.13 | 1.35 | 1.58 |
Key features
- Sheet down to 0.64 mm
- Zinc plated steel
- Small sizes
Applications
Thin enclosuresElectronicsComputer chassisAppliances
Need a size, grade or finish not listed? We also make special and non-standard parts to drawing. Ask us →
Related products
All products →You may also need
Flush Head StudsStuds that press in flush, M2 to M8, lengths 5 to 50 mm.View details →
Flush Head PinsUnthreaded locating pins with a flush head, 3 to 6 mm.View details →
High Strength StudsHex-head clinch studs for high torque, M5 to M10.View details →
High Strength Studs for Thin SheetsHigh-strength studs designed for thin sheet metal.View details →
